This simple to install kit allows you to add a backup camera to any Ford or Lincoln vehicle (listed in the compatibility section below) in three easy steps:
- Install our (optional) Plug n' Play "T" harness behind the touchscreen
- Plug the camera of your choice into our T harness
- Easily enable the backup camera input using included CANopener™ Flash programmer
FEATURES:
- Enables the backup camera input on your factory touchscreen
- Simple DIY vehicle programming
- Maintains factory & extended warranties
- Non-refundable once used
- Single vehicle use - locks to first vehicle
- Guaranteed to work on compatible vehicles below
CAMERA SUPPORT
This Programmer and harness will add a reverse camera input when the vehicle did not originally come equipped with a backup camera. It will NOT add input for additional cameras/multi-camera support.
Our harness will support any NTSC (USA) vehicle backup camera with a standard RCA connection. Please note, ALL Ford screens require the camera to be powered from an ignition switched power source (one that turns on and off with the vehicle). DO NOT CONNECT YOUR CAMERA TO THE REVERSE LIGHT. The delay in the reverse lights powering the camera will cause the Ford screen to be black with no image and / or an error message to show on the screen.
Ford offers a feature called "camera delay" that keeps the camera on, after shifting out of reverse, until a pre-set speed (~7mph) is reached or the vehicle is placed in park. It's good for connecting trailers and such. Some screens have a menu selection to enable / disable it. For other vehicles it is a permanent feature. You can look for more information in your user manual.
COMPATIBILITY:
- Many 4" and all 6.5" and 8" Ford screens between 2013 and 2020 excluding the 2014 and older Mustang and Expedition.
| Ford | Year(s) | Harness | Notes | Screen P/N | Adapter |
| CMAX | 2013-2018 | Harness A | 8" Touchscreen ONLY | ALL | |
| CMAX | 2013-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| EcoSport | 2018-2022 | Harness A | All screens and trim levels | ALL | |
| Edge | 2011-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| Edge | 2011-2017 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Edge | 2018-2020 | Harness A | All screens and trim levels | ALL | |
| Escape | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Escape | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Escape | 2020-2022 | Harness A | All screens and trim levels | ALL | |
| Explorer | 2011-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Explorer | 2011-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Explorer | 2020-2023 | Harness A | All screens and trim levels | ALL | |
| Expedition | 2015-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| Expedition | 2015-2017 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Expedition | 2018-2021 | Harness A | All screens and trim levels | ALL | |
| F-150 | 2013-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| F-150 | 2013-2017 | Harness B | 4" Non-Touchscreen ONLY | ALL | |
| F-150 | 2018-2020 | Harness A | All screens and trim levels | ALL | |
| F-250/350/450/550 | 2013-2016 | Harness A | 8" touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2017-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2017-2019 | Harness B | 4" Non-Touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2020-2023 | Harness A | 4" Non-Touchscreen & 8" Touchscreen ONLY | ALL | |
| Fiesta | 2014-2019 | Harness A | 6.5" touchscreen ONLY | ALL | |
| Fiesta | 2014-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Flex | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Flex | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Focus | 2012-2018 | Harness A | 8" Touchscreen ONLY | ALL | |
| Focus | 2012-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Fusion | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Fusion | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Fusion | 2020 | Harness A | All screens and trim levels | ALL | |
| Mustang | 2015-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Mustang | 2015-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Mustang | 2020-2023 | Harness A | All screens and trim levels | ALL | |
| Ranger | 2019-2023 | Harness A | All screens and trim levels | ALL | |
| Taurus | 2013-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Taurus | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Transit | 2015-2019 | Harness A | 6.5" touchscreen ONLY | ALL | |
| Transit | 2015-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Transit | 2020-2021 | Harness A | 8" Touchscreen ONLY | ALL | |
| Transit | 2020-2023 | Harness A | 4" w/ 911 Assist | ALL | |
| Transit | 2020-2023 | Harness C | 4" w/o 911 Assist | ALL | |
| Transit Connect | 2014-2018 | Harness A | 6.5" Touchscreen ONLY | ALL | |
| Transit Connect | 2014-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Transit Connect | 2019-2022 | Harness A | 6.5" Touchscreen ONLY | ALL | |
| Transit Connect | 2019-2022 | Harness A | 4" Non-Touchscreen ONLY | ALL |
CHART ADDENDUM:
- If your part number is not listed below, camera compatibility can be verified by testing resistance between pins 6 and 12 on the back of the display. If resistance reads ~75 Ω, display is camera compatible. See video under the video tab for details on how to use this method to verify compatibility.
| Compatible Displays | |||||
| BB5T-19C116-CK | CM5T-18B955-GD | DG1T-18B955-CD | DT4T-19C116-CC | EG1T-18B955-CA | ES7T-18B955-CB |
| BT4T-19C116-CP | CM5T-18B955-GE | DL3T-18B955-CC | DT4T-19C116-CD | EG1T-18B955-CD | ET4T-18B955-CC |
| CB5T-19C116-CC | CM5T-18B99-GG | DL3T-18B955-CD | DT4T-19C116-GB | EJ5T-18B955-CC | ET4T-19C116-GG |
| CB5T-19C116-CD | DA8T-18B955-CD | DL3T-18B955-CF | DT4T-19C116-GD | EJ5T-18B955-GA | FB5T-19C116-CA |
| CB5T-19C116-GC | DA8T-18B955-CF | DL3T-18B955-CG | EA8T-18B955-CB | EJ5T-18B955-GB | FB5T-19C116-GA |
| CB5T-19C116-GD | DB5T-19C116-CA | DS7T-18B955-CE | EB5T-18B955-GA | EL3T-18B955-CE | FG1T-18B955-CA |
| CK4T-18B955-CF | DB5T-19C116-CB | DS7T-18B955-CF | EB5T-18B955-GC | EM5T-18B955-CF | FR3T-18B955-CG |
| CM5T-18B955-CF | DB5T-19C116-GA | DT4T-19C116-CA | EB5T-19C116-CA | EM5T-18B955-JB | ET4T-19C116-CD |
| CM5T-18B955-GB | DB5T-19C116-GB | DT4T-19C116-CB | EB5T-19C116-CD | ES7T-18B955-CA | |
| Incompatible Displays | |||||
| BB5T-19C116-CJ | CE8T-18B955-AD | CJ5T-18B955-GF | CM5T-18B955-CE | D2BT-18B955-BE | EM5T-18B955-CA |
| BT4T-19C116-CN | CJ5T-18B955-GC | CM5T-18B955-AB | CM5T-18B955-GF | DA6T-18B955-BB | EM5T-18B955-CB |
| CE8T-18B955-AA | CJ5T-18B955-GE | CM5T-18B955-AD | CM5T-18B99-AD | DM5T-18B955-CD |
|
- Simply insert into the diagnostic port below the steering wheel.
FREQUENTLY ASKED QUESTIONS:
- Q – “Will this work on my vehicle”
- A – Yes. This had been tested on on all the models and years listed.
- Q – “Does this product cause any issues / disable any features?”
- A – No. This product does not cause any issues or disable any features.
- Q – “Will this void my warranty?”
- A – No. This product will not void your vehicle warranty
Videos Hide Videos Show Videos
-
8" SYNC 2 / SYNC 3 Backup Rear Camera Programmer and Harness
Get the SYNC 2 or SYNC 3 Backup Rear Camera Programmer and Har...
-
4.2" MyFord Screen - Backup Camera Compatibility Testing
Visit https://www.4dtech.com to purchase kits and parts like t...
-
Flash™ Programmer - Stand Alone Vehicle Programming from 4D Tech!
Visit https://www.4dtech.com for more info!
103 Reviews Hide Reviews Show Reviews
-
Excellent item
SO EASY TO USE. JUST PLUG IT IN AND WAIT SECONDS. IT DOES ITS BLINKING SEQUENCE THEN TURNS GREEN, AND YOU NOW HAVE REVERSE CAMERA FUNCTION. IF IT WAS ANY EASIER. A CAVEMAN COULD DO IT!
-
Excellent Product
Decided to go this route for my fiesta rather than pin my harness myself. Good quality product with no fitment issues. Works flawlessly. Quick shipping to Canada as well.
-
Excellent Product
Decided to go this route for my fiesta rather than pin my harness myself. Good quality product with no fitment issues. Works flawlessly. Quick shipping to Canada as well.
-
Good product
Simple to install, using your 4" screen is better than an after market monitor. Makes for a nice clean installation of a backup camera. I only wish this was avaible when I installed a backup camera 4 + years ago. would hiighly recomend.
-
Great product and quality
Skeptical at first but upon delivery i noticed the amazing; almost like OEM quality, even the RCA plug was protected. Well built, worked right out of the box.
Using it with Sync 2 in Colombia with a Ford Fiesta Titanium w/ PowerShift. Enabled the rearview cam via Forscan -
Great product and quality
Skeptical at first but upon delivery i noticed the amazing; almost like OEM quality, even the RCA plug was protected. Well built, worked right out of the box.
Using it with Sync 2 in Colombia with a Ford Fiesta Titanium w/ PowerShift. Enabled the rearview cam via Forscan -
2017 f150 camera Harness
Great product plug and play easy install . Camera works great just as factory does any camera will work I used ford tailgate handle camera splice wires to video rca hook up or you can buy there camera to make it easy . Highly recommended product
-
Perfect
Received exactly what I paid for in 2 days, looks like it came right from the factory wire wrapping and all. Simple plug and play!
-
Perfect
Received exactly what I paid for in 2 days, looks like it came right from the factory wire wrapping and all. Simple plug and play!
