This simple to install kit allows you to add a backup camera to any Ford or Lincoln vehicle (listed in the compatibility section below) in three easy steps:
- Install our (optional) Plug n' Play "T" harness behind the touchscreen
- Plug the camera of your choice into our T harness
- Easily enable the backup camera input using included CANopener™ Flash programmer
FEATURES:
- Enables the backup camera input on your factory touchscreen
- Simple DIY vehicle programming
- Maintains factory & extended warranties
- Non-refundable once used
- Single vehicle use - locks to first vehicle
- Guaranteed to work on compatible vehicles below
CAMERA SUPPORT
This Programmer and harness will add a reverse camera input when the vehicle did not originally come equipped with a backup camera. It will NOT add input for additional cameras/multi-camera support.
Our harness will support any NTSC (USA) vehicle backup camera with a standard RCA connection. Please note, ALL Ford screens require the camera to be powered from an ignition switched power source (one that turns on and off with the vehicle). DO NOT CONNECT YOUR CAMERA TO THE REVERSE LIGHT. The delay in the reverse lights powering the camera will cause the Ford screen to be black with no image and / or an error message to show on the screen.
Ford offers a feature called "camera delay" that keeps the camera on, after shifting out of reverse, until a pre-set speed (~7mph) is reached or the vehicle is placed in park. It's good for connecting trailers and such. Some screens have a menu selection to enable / disable it. For other vehicles it is a permanent feature. You can look for more information in your user manual.
COMPATIBILITY:
- Many 4" and all 6.5" and 8" Ford screens between 2013 and 2020 excluding the 2014 and older Mustang and Expedition.
| Ford | Year(s) | Harness | Notes | Screen P/N | Adapter |
| CMAX | 2013-2018 | Harness A | 8" Touchscreen ONLY | ALL | |
| CMAX | 2013-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| EcoSport | 2018-2022 | Harness A | All screens and trim levels | ALL | |
| Edge | 2011-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| Edge | 2011-2017 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Edge | 2018-2020 | Harness A | All screens and trim levels | ALL | |
| Escape | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Escape | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Escape | 2020-2022 | Harness A | All screens and trim levels | ALL | |
| Explorer | 2011-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Explorer | 2011-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Explorer | 2020-2023 | Harness A | All screens and trim levels | ALL | |
| Expedition | 2015-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| Expedition | 2015-2017 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Expedition | 2018-2021 | Harness A | All screens and trim levels | ALL | |
| F-150 | 2013-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| F-150 | 2013-2017 | Harness B | 4" Non-Touchscreen ONLY | ALL | |
| F-150 | 2018-2020 | Harness A | All screens and trim levels | ALL | |
| F-250/350/450/550 | 2013-2016 | Harness A | 8" touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2017-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2017-2019 | Harness B | 4" Non-Touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2020-2023 | Harness A | 4" Non-Touchscreen & 8" Touchscreen ONLY | ALL | |
| Fiesta | 2014-2019 | Harness A | 6.5" touchscreen ONLY | ALL | |
| Fiesta | 2014-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Flex | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Flex | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Focus | 2012-2018 | Harness A | 8" Touchscreen ONLY | ALL | |
| Focus | 2012-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Fusion | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Fusion | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Fusion | 2020 | Harness A | All screens and trim levels | ALL | |
| Mustang | 2015-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Mustang | 2015-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Mustang | 2020-2023 | Harness A | All screens and trim levels | ALL | |
| Ranger | 2019-2023 | Harness A | All screens and trim levels | ALL | |
| Taurus | 2013-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Taurus | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Transit | 2015-2019 | Harness A | 6.5" touchscreen ONLY | ALL | |
| Transit | 2015-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Transit | 2020-2021 | Harness A | 8" Touchscreen ONLY | ALL | |
| Transit | 2020-2023 | Harness A | 4" w/ 911 Assist | ALL | |
| Transit | 2020-2023 | Harness C | 4" w/o 911 Assist | ALL | |
| Transit Connect | 2014-2018 | Harness A | 6.5" Touchscreen ONLY | ALL | |
| Transit Connect | 2014-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Transit Connect | 2019-2022 | Harness A | 6.5" Touchscreen ONLY | ALL | |
| Transit Connect | 2019-2022 | Harness A | 4" Non-Touchscreen ONLY | ALL |
CHART ADDENDUM:
- If your part number is not listed below, camera compatibility can be verified by testing resistance between pins 6 and 12 on the back of the display. If resistance reads ~75 Ω, display is camera compatible. See video under the video tab for details on how to use this method to verify compatibility.
| Compatible Displays | |||||
| BB5T-19C116-CK | CM5T-18B955-GD | DG1T-18B955-CD | DT4T-19C116-CC | EG1T-18B955-CA | ES7T-18B955-CB |
| BT4T-19C116-CP | CM5T-18B955-GE | DL3T-18B955-CC | DT4T-19C116-CD | EG1T-18B955-CD | ET4T-18B955-CC |
| CB5T-19C116-CC | CM5T-18B99-GG | DL3T-18B955-CD | DT4T-19C116-GB | EJ5T-18B955-CC | ET4T-19C116-GG |
| CB5T-19C116-CD | DA8T-18B955-CD | DL3T-18B955-CF | DT4T-19C116-GD | EJ5T-18B955-GA | FB5T-19C116-CA |
| CB5T-19C116-GC | DA8T-18B955-CF | DL3T-18B955-CG | EA8T-18B955-CB | EJ5T-18B955-GB | FB5T-19C116-GA |
| CB5T-19C116-GD | DB5T-19C116-CA | DS7T-18B955-CE | EB5T-18B955-GA | EL3T-18B955-CE | FG1T-18B955-CA |
| CK4T-18B955-CF | DB5T-19C116-CB | DS7T-18B955-CF | EB5T-18B955-GC | EM5T-18B955-CF | FR3T-18B955-CG |
| CM5T-18B955-CF | DB5T-19C116-GA | DT4T-19C116-CA | EB5T-19C116-CA | EM5T-18B955-JB | ET4T-19C116-CD |
| CM5T-18B955-GB | DB5T-19C116-GB | DT4T-19C116-CB | EB5T-19C116-CD | ES7T-18B955-CA | |
| Incompatible Displays | |||||
| BB5T-19C116-CJ | CE8T-18B955-AD | CJ5T-18B955-GF | CM5T-18B955-CE | D2BT-18B955-BE | EM5T-18B955-CA |
| BT4T-19C116-CN | CJ5T-18B955-GC | CM5T-18B955-AB | CM5T-18B955-GF | DA6T-18B955-BB | EM5T-18B955-CB |
| CE8T-18B955-AA | CJ5T-18B955-GE | CM5T-18B955-AD | CM5T-18B99-AD | DM5T-18B955-CD |
|
- Simply insert into the diagnostic port below the steering wheel.
FREQUENTLY ASKED QUESTIONS:
- Q – “Will this work on my vehicle”
- A – Yes. This had been tested on on all the models and years listed.
- Q – “Does this product cause any issues / disable any features?”
- A – No. This product does not cause any issues or disable any features.
- Q – “Will this void my warranty?”
- A – No. This product will not void your vehicle warranty
Videos Hide Videos Show Videos
-
8" SYNC 2 / SYNC 3 Backup Rear Camera Programmer and Harness
Get the SYNC 2 or SYNC 3 Backup Rear Camera Programmer and Har...
-
4.2" MyFord Screen - Backup Camera Compatibility Testing
Visit https://www.4dtech.com to purchase kits and parts like t...
-
Flash™ Programmer - Stand Alone Vehicle Programming from 4D Tech!
Visit https://www.4dtech.com for more info!
103 Reviews Hide Reviews Show Reviews
-
Sync 2 camera and programmer
This is simply the cheapest and best option by far for my 2013 C-max. I used an empty slot in the rear fuse box with a fuse tap for power to the camera, and a nearby ground. No factory wires were disturbed in the process.
-
Great product!
Great product! Easy to install, it took me about an hour but most of that was was spent running the camera wires. The actual connecting of the cable took maybe 15 mins and it works perfectly.
-
Rear Camera Programmer/Harness
This is a great and affordable product. I purchased the rear camera programmer and wiring harness for a 2013 Ford Focus ST and it works great! And the support staff was very helpful and quick to respond to my dumb questions. In short, this is a simple but elegant product - highly recommended.
-
High quality and as described
Pretty much plug and play, just need to program the APIM for the reversing camera. After programming it works exactly as expected.
-
High quality and as described
Pretty much plug and play, just need to program the APIM for the reversing camera. After programming it works exactly as expected.
-
CanBus programmer for Ford Escape
Top notch product. Plug and play just as advertised. This was super simple. Plugged the Can Bus programmer into the OBD port and about 2 minutes later the 8" display was searching for a camera. Coupled with an Amazon backup camera I plugged the RCA video port into the harness and instant back up camera.
-
Rear View Camera Harness
Plug and play. It was as simple as that. Works flawlessly!
-
Rear View Camera Harness
Plug and play. It was as simple as that. Works flawlessly!
-
Great product.
Just as stated, this is for real. Best price and product any where on the internet. Very easy to install and best price too. 4dTech can't be beat.
My only recommendation is, plan your installation before you actually do it to save you time and headaches. Being that you have to take part of you dash to install the product , if possible, leave it apart until your order comes in. They have very fast shipping.
