This simple to install kit allows you to add a backup camera to any Ford or Lincoln vehicle (listed in the compatibility section below) in three easy steps:
- Install our (optional) Plug n' Play "T" harness behind the touchscreen
- Plug the camera of your choice into our T harness
- Easily enable the backup camera input using included CANopener™ Flash programmer
FEATURES:
- Enables the backup camera input on your factory touchscreen
- Simple DIY vehicle programming
- Maintains factory & extended warranties
- Non-refundable once used
- Single vehicle use - locks to first vehicle
- Guaranteed to work on compatible vehicles below
CAMERA SUPPORT
This Programmer and harness will add a reverse camera input when the vehicle did not originally come equipped with a backup camera. It will NOT add input for additional cameras/multi-camera support.
Our harness will support any NTSC (USA) vehicle backup camera with a standard RCA connection. Please note, ALL Ford screens require the camera to be powered from an ignition switched power source (one that turns on and off with the vehicle). DO NOT CONNECT YOUR CAMERA TO THE REVERSE LIGHT. The delay in the reverse lights powering the camera will cause the Ford screen to be black with no image and / or an error message to show on the screen.
Ford offers a feature called "camera delay" that keeps the camera on, after shifting out of reverse, until a pre-set speed (~7mph) is reached or the vehicle is placed in park. It's good for connecting trailers and such. Some screens have a menu selection to enable / disable it. For other vehicles it is a permanent feature. You can look for more information in your user manual.
COMPATIBILITY:
- Many 4" and all 6.5" and 8" Ford screens between 2013 and 2020 excluding the 2014 and older Mustang and Expedition.
| Ford | Year(s) | Harness | Notes | Screen P/N | Adapter |
| CMAX | 2013-2018 | Harness A | 8" Touchscreen ONLY | ALL | |
| CMAX | 2013-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| EcoSport | 2018-2022 | Harness A | All screens and trim levels | ALL | |
| Edge | 2011-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| Edge | 2011-2017 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Edge | 2018-2020 | Harness A | All screens and trim levels | ALL | |
| Escape | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Escape | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Escape | 2020-2022 | Harness A | All screens and trim levels | ALL | |
| Explorer | 2011-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Explorer | 2011-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Explorer | 2020-2023 | Harness A | All screens and trim levels | ALL | |
| Expedition | 2015-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| Expedition | 2015-2017 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Expedition | 2018-2021 | Harness A | All screens and trim levels | ALL | |
| F-150 | 2013-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| F-150 | 2013-2017 | Harness B | 4" Non-Touchscreen ONLY | ALL | |
| F-150 | 2018-2020 | Harness A | All screens and trim levels | ALL | |
| F-250/350/450/550 | 2013-2016 | Harness A | 8" touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2017-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2017-2019 | Harness B | 4" Non-Touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2020-2023 | Harness A | 4" Non-Touchscreen & 8" Touchscreen ONLY | ALL | |
| Fiesta | 2014-2019 | Harness A | 6.5" touchscreen ONLY | ALL | |
| Fiesta | 2014-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Flex | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Flex | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Focus | 2012-2018 | Harness A | 8" Touchscreen ONLY | ALL | |
| Focus | 2012-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Fusion | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Fusion | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Fusion | 2020 | Harness A | All screens and trim levels | ALL | |
| Mustang | 2015-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Mustang | 2015-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Mustang | 2020-2023 | Harness A | All screens and trim levels | ALL | |
| Ranger | 2019-2023 | Harness A | All screens and trim levels | ALL | |
| Taurus | 2013-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Taurus | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Transit | 2015-2019 | Harness A | 6.5" touchscreen ONLY | ALL | |
| Transit | 2015-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Transit | 2020-2021 | Harness A | 8" Touchscreen ONLY | ALL | |
| Transit | 2020-2023 | Harness A | 4" w/ 911 Assist | ALL | |
| Transit | 2020-2023 | Harness C | 4" w/o 911 Assist | ALL | |
| Transit Connect | 2014-2018 | Harness A | 6.5" Touchscreen ONLY | ALL | |
| Transit Connect | 2014-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Transit Connect | 2019-2022 | Harness A | 6.5" Touchscreen ONLY | ALL | |
| Transit Connect | 2019-2022 | Harness A | 4" Non-Touchscreen ONLY | ALL |
CHART ADDENDUM:
- If your part number is not listed below, camera compatibility can be verified by testing resistance between pins 6 and 12 on the back of the display. If resistance reads ~75 Ω, display is camera compatible. See video under the video tab for details on how to use this method to verify compatibility.
| Compatible Displays | |||||
| BB5T-19C116-CK | CM5T-18B955-GD | DG1T-18B955-CD | DT4T-19C116-CC | EG1T-18B955-CA | ES7T-18B955-CB |
| BT4T-19C116-CP | CM5T-18B955-GE | DL3T-18B955-CC | DT4T-19C116-CD | EG1T-18B955-CD | ET4T-18B955-CC |
| CB5T-19C116-CC | CM5T-18B99-GG | DL3T-18B955-CD | DT4T-19C116-GB | EJ5T-18B955-CC | ET4T-19C116-GG |
| CB5T-19C116-CD | DA8T-18B955-CD | DL3T-18B955-CF | DT4T-19C116-GD | EJ5T-18B955-GA | FB5T-19C116-CA |
| CB5T-19C116-GC | DA8T-18B955-CF | DL3T-18B955-CG | EA8T-18B955-CB | EJ5T-18B955-GB | FB5T-19C116-GA |
| CB5T-19C116-GD | DB5T-19C116-CA | DS7T-18B955-CE | EB5T-18B955-GA | EL3T-18B955-CE | FG1T-18B955-CA |
| CK4T-18B955-CF | DB5T-19C116-CB | DS7T-18B955-CF | EB5T-18B955-GC | EM5T-18B955-CF | FR3T-18B955-CG |
| CM5T-18B955-CF | DB5T-19C116-GA | DT4T-19C116-CA | EB5T-19C116-CA | EM5T-18B955-JB | ET4T-19C116-CD |
| CM5T-18B955-GB | DB5T-19C116-GB | DT4T-19C116-CB | EB5T-19C116-CD | ES7T-18B955-CA | |
| Incompatible Displays | |||||
| BB5T-19C116-CJ | CE8T-18B955-AD | CJ5T-18B955-GF | CM5T-18B955-CE | D2BT-18B955-BE | EM5T-18B955-CA |
| BT4T-19C116-CN | CJ5T-18B955-GC | CM5T-18B955-AB | CM5T-18B955-GF | DA6T-18B955-BB | EM5T-18B955-CB |
| CE8T-18B955-AA | CJ5T-18B955-GE | CM5T-18B955-AD | CM5T-18B99-AD | DM5T-18B955-CD |
|
- Simply insert into the diagnostic port below the steering wheel.
FREQUENTLY ASKED QUESTIONS:
- Q – “Will this work on my vehicle”
- A – Yes. This had been tested on on all the models and years listed.
- Q – “Does this product cause any issues / disable any features?”
- A – No. This product does not cause any issues or disable any features.
- Q – “Will this void my warranty?”
- A – No. This product will not void your vehicle warranty
Videos Hide Videos Show Videos
-
8" SYNC 2 / SYNC 3 Backup Rear Camera Programmer and Harness
Get the SYNC 2 or SYNC 3 Backup Rear Camera Programmer and Har...
-
4.2" MyFord Screen - Backup Camera Compatibility Testing
Visit https://www.4dtech.com to purchase kits and parts like t...
-
Flash™ Programmer - Stand Alone Vehicle Programming from 4D Tech!
Visit https://www.4dtech.com for more info!
103 Reviews Hide Reviews Show Reviews
-
Rear Camera Programmer for SYNC 1 (4" Screen)
Easy purchase. fast shipping and worked flawlessly.
would definitely by products from them again.
thank you! -
Rear View Camera
The product was exactly as advertised. The install was straight forward and worked as listed. At this point I would clearly recommend this product to add a rear view camera to any Ford Sync II or III system.
-
easy installation
This was by far easiest installation I ever had on a car, just plug and play and with the can opener made the camera work in less than 15 minutes I had a backup view.
-
easy installation
This was by far easiest installation I ever had on a car, just plug and play and with the can opener made the camera work in less than 15 minutes I had a backup view.
-
Amazing quality
Added backup camera to my 2015 Fiesta ST. Worked like a charm. This made the install very easy.
-
Amazing quality
Added backup camera to my 2015 Fiesta ST. Worked like a charm. This made the install very easy.
-
It works!
Might be a bit pricey, but it works perfectly!
-
Camera programmer for sync 1
Worked perfect, no issues!!
-
Canopener Flash Programmer works as easy as plug n play!
This product worked like a charm! Easy to use! Just plug it in, wait a few seconds and the reverse camera worked when shifting into reverse.
I also purchased the harness which was also very easy to install.
I used this product for my 2014 Ford Focus ST. My year didn't come with the reverse camera and saw that this product will enable me to have one. Everything worked as intended and I have no complaints.
